Work principle

The sucking mouth will suck the paper which has been printed previously, from the paper bracket to the transportation chain, and then transport it to the forming mould. During the transportation, the paper will be spread with hot-melt glue. The position, length and quantity of thermal sol can be adjusted during the production process without stopping the machine. After the formation, the paper spread with glue will be automatically blown to be transported to the collection machine .The piling and counting are automatic. And the paper will be carried out according to the prearranged piling numbers without stopping the machine.

Machine detail:

The electric equipment has safe protection of connecting to ground and null.
There is over current protector and malfunction alert connected on the power circuit of electric motor.
The counter is controlled by proximity switch.
The glue-spraying action of the thermo sol nozzle is controlled by proximity switch control circuit of high sensitivity and high frequency.
The start and stop of cone discharging electric motor is respectively controlled by PLC internal program and proximity switch.
The time of air absorption of vacuum nozzle, glue-spraying of nozzle, air absorption and air blowing of the mould are adjusted respectively by four proximity switch control circuit.

Technical data

Model	JXG-A
Production speed	maximum speed 180 pieces per minute
The raw material	ordinary paper, composite aluminum foil paper or dry stencil paper, paper thickness 100-150gsm
Minimum height	140mm
Maximum height	210mm
Angle	17°~22°
Power source	380V, 50HZ
Working power	5.5KW
Air consumption	1m3/min, ≥0.7MPa
Space required	2mx2m
Weight	1000kg
Main machine packing size （L×W×H）	1300×1150×1900mm 1250×700×1100mm